Download the installation guide
Ordering steps:
1-Choose your chevron model 1, 2, 3 or 4
2-Choose the color
3-Enter the surface
4-You have the possibility to choose a starting kit of pre-cut pieces according to the desired design, in W or in S.
Thin and surprisingly light, this unusual product opens the way to new possibilities for your concrete-based interior design. Easy to install, chic and elegant.
DON'T FORGET TO ORDER THE ADHESIVE
 |
Perfect for an accent wall |
 |
Perfect for a kitchen backsplash |
|
Quick and easy to install. No need for grout, spacers or grout cleaning! |
 |
Lightweight |
 |
Fire resistant |
 |
Water resistant |
 |
Antibacterial |
 |
Easy to clean |
 |
Ethically made in Quebec |
Chevron 1
Thickness: 3/8" (0,95 cm)
Width: 2"-1/4 (5,72 cm)
Length: 11"-3/4 (29,84 cm)
Chevron 2
Thickness: 3/8" (0,95 cm)
Width: 2"-1/4 (5,72 cm)
Length: 9" (22,86 cm)
Chevron 3
Thickness: 3/8" (0,95 cm)
Width: 3"-3/4 (9,53 cm)
Length: 15"-1/8 (38,43 cm)
Chevron 4
Thickness: 3/8" (0,95 cm)
Width: 3"-3/4 (9,53 cm)
Length: 22"-3/4 (57,66 cm)
Each box contains enough pieces to cover approximately ten square feet of wall. A starter kit and the special Adfast glue we recommend must be purchased in addition.
The average weight of a box is 30 lbs (14 kg). Your order can be shipped by mail, by Purolator or by any other suitable transport depending on the quantity chosen.
It is also possible to pick up your boxes directly at our warehouse.
In 5 easy steps!
 |
Check if the bottom of the surface you want to cover is level. A laser level is handy for this step; |
 |
The "Starter Kit for a W or S shaped installation of Chevron #1or 4 pieces for a W or S installation of Chevron #2, #3 or #4 :
W-1:
S-1:
W-2:
S-2: 
|
 |
Start your installation at the lower left or right corner of the area to be covered:
W-1:
S-1:
W-2:
S-2: 
|
 |
Extract a quarter-sized amount of Adfast adhesive every 6" on the rafter pieces to be glued. |
 |
If you only purchased one starter kit, use the paper template to cut the remaining pieces as you install the bottom of your surface. Cut the pieces using a portable circular saw or a bench saw with a circular (diamond) concrete blade. You can also use an angle grinder and a diamond disc. |
Download the installation guide
Ordering steps:
1-Choose your chevron model 1, 2, 3 or 4
2-Choose the color
3-Enter the surface
4-You have the possibility to choose a starting kit of pre-cut pieces according to the desired design, in W or in S.
Thin and surprisingly light, this unusual product opens the way to new possibilities for your concrete-based interior design. Easy to install, chic and elegant.
DON'T FORGET TO ORDER THE ADHESIVE
|
Perfect for an accent wall |
|
Perfect for a kitchen backsplash |
|
|
Quick and easy to install. No need for grout, spacers or grout cleaning! |
|
Lightweight |
|
Fire resistant |
|
Water resistant |
|
Antibacterial |
|
Easy to clean |
|
Ethically made in Quebec |
Chevron 1
Thickness: 3/8" (0,95 cm)
Width: 2"-1/4 (5,72 cm)
Length: 11"-3/4 (29,84 cm)
Chevron 2
Thickness: 3/8" (0,95 cm)
Width: 2"-1/4 (5,72 cm)
Length: 9" (22,86 cm)
Chevron 3
Thickness: 3/8" (0,95 cm)
Width: 3"-3/4 (9,53 cm)
Length: 15"-1/8 (38,43 cm)
Chevron 4
Thickness: 3/8" (0,95 cm)
Width: 3"-3/4 (9,53 cm)
Length: 22"-3/4 (57,66 cm)
Each box contains enough pieces to cover approximately ten square feet of wall. A starter kit and the special Adfast glue we recommend must be purchased in addition.
The average weight of a box is 30 lbs (14 kg). Your order can be shipped by mail, by Purolator or by any other suitable transport depending on the quantity chosen.
It is also possible to pick up your boxes directly at our warehouse.
In 5 easy steps!
|
Check if the bottom of the surface you want to cover is level. A laser level is handy for this step; |
|
The "Starter Kit for a W or S shaped installation of Chevron #1or 4 pieces for a W or S installation of Chevron #2, #3 or #4 :
W-1:
S-1:
W-2:
S-2:
|
|
Start your installation at the lower left or right corner of the area to be covered:
W-1:
S-1:
W-2:
S-2:
|
|
Extract a quarter-sized amount of Adfast adhesive every 6" on the rafter pieces to be glued. |
|
If you only purchased one starter kit, use the paper template to cut the remaining pieces as you install the bottom of your surface. Cut the pieces using a portable circular saw or a bench saw with a circular (diamond) concrete blade. You can also use an angle grinder and a diamond disc. |